LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Starting System & Charging System (H4DO)) >> Generator >> Inspection >> Stator Coil

Stator Coil

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Continuity test

    Inspect the continuity between the stator coil terminals. If continuity is not as shown in the table, replace the stator coil.

    Fig 1: Stator Coil Terminal Continuity Chart
    G07665197Courtesy of SUBARU OF AMERICA, INC.
    Fig 2: Checking Continuity Between Stator Coil Terminals
    G07665198Courtesy of SUBARU OF AMERICA, INC.
  2. Insulation test

    Inspect the continuity between the stator coil stator core and lead wire terminals. If there is continuity, replace the stator coil because the stator coil is grounded.

    Fig 3: Checking Continuity Between Stator Coil Stator Core And Lead Wire Terminals
    G07665199Courtesy of SUBARU OF AMERICA, INC.