Rear Gate Damper Stay

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not damage piston rods and oil seals.
Never disassemble cylinders: They contain gas.

Before removing the rear gate damper stay, prevent the rear gate from closing using prop or the like.
CAUTION: If the prop comes off, operators may get injured and vehicle may get damaged. Make sure to support the rear gate with secure material to prevent injury or damage.

Fig 1: Supporting Rear Gate Using Prop
Courtesy of SUBARU OF AMERICA, INC.
Remove the mounting bolt of rear gate damper stay.

Fig 2: Removing Mounting Bolt Of Rear Gate Damper Stay
Courtesy of SUBARU OF AMERICA, INC.
Remove the mounting bolts and the damper stay.

Fig 3: Locating Damper Stay Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.