LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Body Panel System - Exterior Body Panels) >> Front Hood >> Installation

Front Hood: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install each part in the reverse order of removal.

NOTE:
  • Be careful not to catch the window washer hose between insulators etc.
  • Install while paying attention to make a uniform clearance around the front hood panel. For the dimension of clearance, refer to "SPECIFICATION" in "General Description". < Ref. to SPECIFICATION , General Description. >

Tightening torque:  Refer to "COMPONENT" of "General Description". < Ref. to FRONT HOOD , COMPONENT, General Description. >

scientia non olet · About LEMON Manuals