LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Body Panel System - Exterior Body Panels) >> Front Hood >> Adjustment

Front Hood: Adjustment

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust the clearance between front hood panel and front fender panel. Clearance must be equal at both sides. For the dimension of clearance, refer to "SPECIFICATION" in "General Description". < Ref. to SPECIFICATION , General Description. >
  2. Use the hinge mounting bolts to align the front hood longitudinal and lateral position.
    Fig 1: Locating Front Hood Hinge Mounting Bolts
    G05958165Courtesy of SUBARU OF AMERICA, INC.
  3. Adjust the height at the front end of hood. < Ref. to ADJUSTMENT , Front Hood Lock Assembly. >
  4. Rotate the hood buffer to adjust lateral height.
    Fig 2: Locating Hood Buffer
    G04995658Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals