LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Body Panel System - Exterior Body Panels) >> Front Fender >> Installation

Front Fender: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Always use new double sided tape.
  • After the installation of front fender panel, be sure to perform headlight beam adjustment.

Install each part in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

NOTE: Install while paying attention to make a uniform clearance around the front fender panel. For the dimension of clearance, refer to "SPECIFICATION" in "General Description". < Ref. to SPECIFICATION , General Description. >
scientia non olet · About LEMON Manuals