LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (General Information) >> Timing Belt >> Inspection >> Turbo Model (Other Inspections)

Turbo Model (Other Inspections)

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the timing belt cover (LH).
  2. While cranking engine at least four rotations, check the timing belt back surface for cracks or damage. Replace any faulty timing belt with a new part as needed.
  3. If the surface of timing belt (surface indicated by the arrow in the+ illustration) is worn abnormally (scuffing and coming out of core) or damaged, inspect the idlers, tensioner, water pump pulley and cam sprocket and check the idler alignment for squareness. Replace any worn timing belt with a new part.
    Fig 1: Locating Worn Timing Belt
    G07664585Courtesy of SUBARU OF AMERICA, INC.
  4. Install the timing belt cover (LH).
scientia non olet · About LEMON Manuals