Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear noise insulation -2-. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

Fig 1: Identifying Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

Fig 2: Removing/Installing Engine Speed Sensor -G28-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and then remove the Engine Speed Sensor -G28- downward.