Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Engine oil is drained, refer to ENGINE OIL, DRAINING/EXTRACTING; OIL FILTER, REPLACING .
-- Remove the noise insulation, refer to OVERVIEW - NOISE INSULATION .
-- Disconnect the connector -2-.
-- Take out the nuts -1- and remove the Oil Level Thermal Sensor -G266- -3-.