Overview - Windshield

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

In vehicles with lane assist, the camera must be recalibrated after replacing the windshield. Refer to LANE ASSIST, GENERAL INFORMATION .

Fig 1: Overview Of Windshield With Dimensions

Courtesy of AUDI OF AMERICA, LLC

Windshield
- Distance to roof dimension -a- = 2 mm.
- Align the side distance -c-.
Adhesive Bead
- Observe minimum curing time. Refer to MINIMUM CURING TIME FOR BONDED WINDOWS .
  - Dimension -b- = 17 mm ^{± 2 mm}
  - Dimension -c- = 8 mm ^{± 2 mm}
  - Dimension -d- = 12 mm ^{± 2 mm}
Gap Cover
- No replacement part
  - When removing the window, the cutting wire must be pulled under the gap cover.
Drip Rail
Plenum Chamber Cover Frame
- No replacement part
- With a new window, protective piping must first be removed before installing plenum chamber cover.
Plenum Chamber Cover
- Press into the molding only after window adhesive minimum curing time is complete (3 hours).

Fig 2: Removing Protective Piping

Courtesy of AUDI OF AMERICA, LLC

-- With a new windshield -1-, protective piping -2- must be removed from molding -3- before installing plenum chamber cover -4-.