Adhesive, Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Adhesive Remover D 002 000 10 is recommended as a cleaning solution. Follow all safety precautions.
CAUTION:
When cleaning from vehicle interior out, the window just installed must not be pressed outward.
Paint Surfaces
-- First, clean paint surfaces with a dry cloth. Remove residual adhesive with Adhesive Remover D 002 000 10.
Plastic Trim
-- Allow the adhesive to harden (approximately 1 hour) and then peel it off.