LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 702 (Glass & Window Regulators) >> 64 Glass, Window Regulators >> Rear Window >> Overview - Rear Window

Overview - Rear Window

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Rear Lid Window With Dimensions
GWWA64-10331Courtesy of AUDI OF AMERICA, LLC
  1. Rear Window
  2. Adhesive Bead
    NOTE:

    Note varying spacing dimensions to window edge.

    • Dimension -a- = 11 mm.
    • Dimension -b- = 12.5 mm.
    • Dimension -c- = 15.5 mm.
  3. Roof Spoiler
  4. Adhesive Stop Profile
    • Must be adhered before window adhesive, near rear window heater distributing wire.
    • Place inner edge of adhesive stop profile to outer edge of distributing wire for rear window heater and press on.
    • Window adhesive must not come into contact with rear window defroster distributing wire.
scientia non olet · About LEMON Manuals