LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Clutch - Manual Transmission Internal Components 0B4 AWD (Coupe)) >> Clutch >> Removal And Installation >> Over-Center Spring >> Removing

Over-Center Spring: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the instrument panel cover on the driver side. Refer to STORAGE COMPARTMENTS AND COVERS .

Fig 1: Removing Driver Side Storage Compartment
GWWA68-10158Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -C-, if applicable.

Fig 2: Removing Footwell Vents
GWWA87-10491Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -A- and the left footwell vent -B-. Refer to the appropriate service information .

-- Actuate the clutch pedal -1- in direction of -arrow-. Press the T40025 over the stretched over-center spring -2-.

Fig 3: Actuating Clutch Pedal
GWWA30-10156Courtesy of AUDI OF AMERICA, LLC

-- Press the clutch pedal -1- down as far as the stop and insert the over-center spring -2- with the T40025.