Power take-off drive chain, component overview

WARNING: This page is about a different car, the 2008 Audi RS 4 and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Power Take-Off Drive Chain, Component Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - 9 Nm

2 - Chain tensioner

With glide track

3 - Gasket

Replace

4 - Spring

5 - 42 Nm

6 - Pivot pin for idler sprocket

7 - Idler sprocket for chain for power take-off

8 - Thrust washer

Depending on version

9 - Mounting bracket for idler chain sprocket

10 - 9 Nm

11 - Power take-off drive chain

Before removing, mark direction of rotation with paint. Reversing rotation direction of a used chain can destroy it.
Removing and installing → Power take-off drive chain, removing and installing

12 - Crankshaft

13 - Drive sprocket for power take-off

14 - 64 Nm