LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (4.2L - Engine Mechanical, Engine Code(S): BNS) >> 13 - Engine - Crankshaft, Cylinder Block >> Timing chain side, servicing operations >> Dual-mass flywheel, removing and installing >> Torque specification

Torque specification

WARNING: This page is about a different car, the 2008 Audi RS 4 and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
Component Nm
Dual-mass flywheel to crankshaft  
Bolt length 22.3 mm 60 + 90 ° 1)2)
  • 1) Replace bolts.
  • 2) 90 ° corresponds to a quarter turn.
scientia non olet · About LEMON Manuals