Engine, securing to assembly stand

WARNING: This page is about a different car, the 2008 Audi RS 4 and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools - Engine, Securing To Assembly Stand

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required

Lifting tackle 3033
Engine and transmission holder VAS 6095 with adapter set VAS 6095/1-6A
Shop crane VAS 6100

Special tools, testers and auxiliary items required

Fig 2: Lift Arm Extension For Workshop Crane VAS 6101

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Lift arm extension for workshop crane VAS 6101

Work procedure

Fig 3: Disconnecting Electrical Harness Connector At Left Engine Mount & Removing Engine Bracket Nut On Left Engine Support

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect electrical harness connector at left engine mount - 1 -.
Remove engine bracket nut - 2 - on left engine support.
Remove engine bracket with left engine mount plate.
Remove power-steering pump hydraulic line bolt - 1 - at engine support.

Fig 4: Removing Bolts And Engine Support

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolts - arrows - and remove engine support.

Fig 5: Removing/Installing Nuts And Left Exhaust Manifold

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove nuts - 1 to 6 - and remove left exhaust manifold.

Fig 6: Removing Wiring Harness Bracket At Right Engine Mount Plate

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove wiring harness bracket at right engine mount plate - arrows -.

Fig 7: Removing Engine Bracket Nut On Right Engine Support

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove engine bracket nut - 1 - on right engine support.
Remove engine bracket with right engine mount plate.

NOTE:

Ignore - 2 -.

Fig 8: Removing Bolts And Right Engine Mount

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolts - arrows - and remove right engine mount.

Fig 9: Removing/Installing Nuts And Right Exhaust Manifold

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove nuts - 1 to 6 - and remove right exhaust manifold.

Fig 10: Engaging Lifting Tackle 3033 On Engine Lifting Eyes And On Shop Crane VAS 6100 With Lift Arm Ext./Workshop Hoist VAS 6101

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engage Lifting Tackle 3033 on engine lifting eyes and on Shop Crane VAS 6100 with Lift Arm Ext./Workshop Hoist VAS 6101 as shown in the illustration.
Lift engine from support elements of scissor lift platform VAS 6131.

Fig 11: Securing Engine With Transmission Holder VAS 6095

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Secure engine using Bracket VAS 6095/1-6A to Engine and Transmission Holder VAS 6095 as shown in illustration.