Electric Drive Motor, Removing And Installing: Notes
WARNING: This page is about a different car, the 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Shop Crane VAS6100
- Torque Wrench 1331 5-50Nm VAG1331
- Lifting Eyebolt VAS3368
- Slide Hammer Set VW771 Adapter 40
- Washer M8
WARNING:
Handling the high voltage cables:
- Do not stand on or place tools on the high voltage cables or their components. This may damage the insulation.
- Do not bend or kink high voltage cables as this may damage the insulation.
- The round high voltage connectors are color coded with an exterior colored ring and mechanically coded with guide or code tabs. Observe the coding when connecting the round high voltage connector in order to avoid mechanical damage to the high voltage connector.