LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 697 (Exterior Body Panels (Hood, Lids)) >> 55 Hood, Lids >> Hood >> Overview - Release Cable >> Release Cable, Engaging In Hood Lock

Release Cable, Engaging In Hood Lock

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Release Cable, Engaging In Hood Lock
GWWA55-10325Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Malfunction

  • The nipple must not be twisted when engaged in the hood lock. Otherwise, the tension can cause it to disengage and it will not be possible to release the hood any more using the release cable.

-- Insert the release cable nipple -2- in the operating lever -arrow- in the hood lock -3-.

-- Engage the release cable with guide -1- in the hood lock from below.

scientia non olet · About LEMON Manuals