Inner Door Seal, Removing And Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Door Seals

Courtesy of AUDI OF AMERICA, LLC

Inner Door Seal
- Remove the upper and lower A-pillar trim panel and B-pillar trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING B-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
- Remove the front grab handle. Refer to ROOF GRAB HANDLE, REMOVING AND INSTALLING .
- Connected all around on body flange
- To remove, remove from body flange.
- When installing, align the seal with the center of the vulcanized joint on the lower hinge and press it by hand onto the body flange.
Door