Lock Cylinder, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Press the door outer seal to the side and remove the cover over the hole -arrow A-.
-- Remove the locking bolt -4- as far as the stop using a screwdriver -1-.
-- Press the lock cylinder retaining bracket -3- inward.
-- Remove the lock cylinder -2- from the mounting bracket -arrow B-.
NOTE:
If the lock cylinder cannot be pressed out, slide the key into it and remove it with the key turned slightly.