Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Bolt Size | Nm |
|---|---|---|
| Ball studs Transmission Housing | - | 25 |
| Bearing Bracket to the Transmission Cover Steel Bolts (30 mm long)2 | M8 | 27 |
| Cap Steel Bolts (25 mm long)2 | M8 | 24 |
| Center Differential Housing | ||
| -Steel Bolts (63 mm long) | M8 | 24 |
| -Aluminum Bolts (42 mm long)1 | M8 | 10 + 90° |
| Clutch Release Lever with Release Bearing and Spring2 | - | 8 |
| Final Drive Cover Steel Bolts (42 mm long) | M8 | 24 |
| Left Flange Shaft Steel Bolts (25 mm long) | M8 | 24 |
| Oil Drain Plug | - | 40 |
| Oil Fill Plug | - | 40 |
| Output Shaft1 | - | 110 |
| Plate2 | - | 24 |
| Reverse Shaft to the Transmission Cover | - | 24 |
| Securing Plate | - | 8 |
| Selector Shaft with Selector Cover, Steel Bolts (25 mm long)2 | M8 | 24 |
| Transmission Cover, Steel Bolts (42 mm long) | M8 | 24 |
| Transmission Neutral Position Sensor, Steel Bolt (25 mm long)2 | M8 | 24 |
| Transmission Range Gear Recognition Switch | - | 20 |
| Vibration Damper2 | - | 24 |
|
||