LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Controls, Housing - Manual Transmission Internal Components 0B4 AWD (Coupe)) >> 34 Controls, Housing >> Disassembly And Assembly >> Gearshift Rails And Selector Forks

Gearshift Rails And Selector Forks

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Removing the shift fork group from the bearing brackets for the input and output shafts. Refer to SHIFT FORK GROUP, INPUT SHAFT, 1ST, 2ND AND REVERSE GEAR OUTPUT SHAFTS OVERVIEW .

Fig 1: Exploded View Of Gearshift Rails & Selector Forks
GWWA34-10632Courtesy of AUDI OF AMERICA, LLC
  1. Gearshift Rail / Reverse Gear Shift Fork
  2. Gearshift Rail / Shift Fork for 1st and 2nd Gear
  3. Ball Sleeve
    • Remove and install, for example, using locking ring pliers (for the outer races) from the gearshift rail / shift fork
  4. Gearshift Rail / Shift Fork for 3rd and 4th Gear
  5. Gearshift Rail / Shift Fork for 5th and 6th Gear
    • With yoke for the gearshift rail / shift fork mounting
    • The shift fork cannot be separated from the yoke.
scientia non olet · About LEMON Manuals