Oil Pan Upper Section, Removing And Installing: Removing
WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- The engine is secured to the engine and transmission holder, refer to ENGINE, SECURING ON ENGINE AND TRANSMISSION HOLDER .
-- Remove the lower timing chain cover, refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .
-- Remove the oil pump, refer to OIL PUMP, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and remove the oil baffle downward.
-- Remove the bolts -1 to 6- for the upper section of the oil pan.
-- Press the upper section of the oil pan off the cylinder block alignment pins.