Overview - Crankcase Ventilation
WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- O-Ring
- Replace
- Oil Check Valve
- Tightening specification: 20 Nm
- For oil supply to right cylinder head
- Seal
- Replace
- Cover with Oil Separator
- With connection for crankcase ventilation
- Removing and installing, refer to OIL SEPARATOR, REMOVING AND INSTALLING .
- Bolt
- Tightening specification: 9 Nm
- Bolt
- Tightening specification: 9 Nm
- Bolt
- Tightening specification: 3 Nm
- Hose for Crankcase Ventilation
- To the intake manifold
- Removing and installing, refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .
- Crankcase Ventilation Hose
- To the cylinder head covers
- Removing and installing, refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .
- O-Rings
- Replace
- Hose for Crankcase Ventilation
- To the air guide pipe
- Oil Check Valve
- Tightening specification: 20 Nm
- For oil supply to left cylinder head
- O-Ring
- Replace