Oil Separator, Removing And Installing: Removing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Lower Section Of The Intake Manifold With Fuel Rail

Courtesy of AUDI OF AMERICA, LLC

-- Remove the crankcase ventilation hoses, refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .

-- Remove the left lower section of the intake manifold, refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Remove the upper coolant pipe, refer to UPPER COOLANT PIPE, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

Fig 2: Identifying Oil Separator Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove high pressure line bracket and oil separator -1-.