LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 675 (Maintenance Procedures) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Wheel Bolts, Tightening To Tightening Specification >> Tightening To Tightening Specification

Tightening To Tightening Specification

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Warning information for the high voltage system:

Procedures for which the ignition needs to be switched off. Refer to PROCEDURES FOR WHICH THE IGNITION NEEDS TO BE SWITCHED OFF .

NOTE:

The adapter to loosen/tighten the anti-theft wheel bolts is located with the vehicle tool kit.

-- Tighten the wheel bolts diagonally to the following specification:

Tightening specification Nm
Wheel Bolts 140

-- Place the adapter and extractor back in the vehicle tool kit.

scientia non olet · About LEMON Manuals