4-Cylinder 2.0L TFSI Gasoline Engine, Version 2: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING .

-- Remove the Heated Oxygen Sensor -G39- -1- connector from the mount.

Fig 1: Heated Oxygen Sensor -G39-

GWWA24-11099

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore items -2 through 4-.

-- Disengage the connector -1 through 4- and at the same time remove all of the plugs from the ignition coils in -direction of arrow-.

Fig 2: Disconnecting Ignition Coils Connectors

GWWA24-11208

Courtesy of AUDI OF AMERICA, LLC

-- Remove ignition coil bolts -arrows-.

Fig 3: Locating Ignition Coil Bolts

GWWA24-11209

Courtesy of AUDI OF AMERICA, LLC

-- Carefully remove ignition coils upward.

NOTE:

Note the installed position of ignition coils with power output stages.

Be careful to not kink or damage the wiring.

-- Remove spark plugs with Spark Plug Removal Tool VAS 3122B.