4-Cylinder 2.0L TFSI Gasoline Engine, Version 1: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Use the Spark Plug Removal Tool VAS 3122B to tighten the new ignition coils to specification.
-- Align all the ignition coils in sequence and insert them loosely into the spark plug shaft.
-- Press the ignition coils evenly onto the spark plugs by hand. Do not use any tools.
-- At the same time, push the plug -arrows- toward the ignition coil until it engages in the locking mechanism.
-- Tighten the connector strip -1- bolts to specification.
-- Install engine cover. Refer to ENGINE COVER, REMOVING .
| Tightening specification | Nm |
|---|---|
| Spark plugs in cylinder head | 30 |
| Connector strip bolts | 5 |