LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 675 (Maintenance Procedures) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Noise Insulation, Removing And Installing >> Rear Noise Insulation, Removing And Installing

Rear Noise Insulation, Removing And Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Warning information for the high voltage system:

Procedures near high voltage components. Refer to PROCEDURES NEAR HIGH VOLTAGE COMPONENTS .

Removing 

NOTE:

To remove the rear noise insulation, first loosen the bolts for the front noise insulation.

-- Remove bolts -7 and 8-.

Fig 1: Removing/Installing Rear Noise Insulation
GWWA66-11095Courtesy of AUDI OF AMERICA, LLC

-- Loosen quick-release connectors -6-.

-- Remove rear noise insulation to the rear.

Installing 

Install in reverse order of removal. Pay attention to the tightening specifications.

NOTE:

The quick-release connectors must engage when they are mounted.

Bolt Tightening specification
Bolts in positions 7 and 8 2.5 Nm
scientia non olet · About LEMON Manuals