LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 674 (3.2L - Engine Cooling System - Engine Code(S): CALB) >> 19 Cooling System >> Coolant Pump/Thermostat >> Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING >> Installing

Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-ring.

To prevent coolant loss, immediately insert new Engine Coolant Temperature Sensor -G62- in the connections.

-- Check the coolant level, refer to CHECK THE COOLANT LEVEL .

scientia non olet · About LEMON Manuals