Coolant Thermostat, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification, refer to OVERVIEW - COOLANT PUMP/THERMOSTAT .

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal.

-- Install front coolant pipe, refer to FRONT COOLANT PIPE, REMOVING AND INSTALLING .

-- Install the intake manifold upper section, refer to INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .

-- Fill with coolant, refer to FILLING .