LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 674 (3.2L - Engine Cooling System - Engine Code(S): CALB) >> 19 Cooling System >> Coolant Pump/Thermostat >> After-Run Coolant Pump -V51-, REMOVING AND INSTALLING >> Installing

After-Run Coolant Pump -V51-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Install the noise insulation, refer to OVERVIEW - NOISE INSULATION .

-- Fill with coolant, refer to COOLANT, DRAINING AND FILLING  - FILLING .

scientia non olet · About LEMON Manuals