Overview - Coolant Pipes

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Coolant Pipes Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

Left Coolant Pipe
- Together with -17-, removing and installing, refer to LEFT COOLANT PIPES, REMOVING AND INSTALLING .
Bolt
- 9 Nm
O-Ring
- Replace
Connecting Hose
Bolts
- 9 Nm
Front Coolant Pipe
- Removing and installing, refer to FRONT COOLANT PIPE, REMOVING AND INSTALLING .
Bolts
- 9 Nm
O-Ring
- Replace
Clip
Engine Coolant Temperature Sensor -G62-
- Removing and installing, refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING .
Seal
- Replace
Coolant hose
Seal
- Replace
O-Ring
- Replace
Upper Coolant Pipe
- Removing and installing, refer to UPPER COOLANT PIPE, REMOVING AND INSTALLING .
Bolt
- 9 Nm
Left Coolant Pipe
- Together with -1-, removing and installing, refer to LEFT COOLANT PIPES, REMOVING AND INSTALLING .
Bolt
- 9 Nm
Coolant Hoses