LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 674 (3.2L - Engine Cooling System - Engine Code(S): CALB) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Coolant Pipes, Removing And Installing >> Removing

Left Coolant Pipes, Removing And Installing: Removing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying A/C Compressor & Bolts
GWWA87-10578Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant (refer to COOLANT, DRAINING AND FILLING ) or, in countries with hot climates, remove the After-Run Coolant Pump -V51-, refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .

-- Remove the Air Conditioning (A/C) compressor, refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the A/C compressor bracket.

Fig 2: Air Conditioning Compressor Bracket Bolts
GWWA10-10150Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

Fig 3: Bolts And Coolant Pipe From Engine
GWWA19-10022Courtesy of AUDI OF AMERICA, LLC

-- Remove the coolant pipes from the coolant hoses by loosening the hose clamps -1 and 2-.

NOTE:

The installation location is shown with the power steering pump removed.