Tail Pipes, Replacing

WARNING: This page is about a different car, the 2012 Audi Q5 and 2011 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Chain Pipe Cutter VAS6254

Procedure

Fig 1: Replacing Tail Pipe

Courtesy of AUDI OF AMERICA, LLC

Tightening specification, refer to OVERVIEW - MUFFLER .

-- Separate the tailpipe -1- at the separating point -C- using Chain Pipe Cutter VAS6254.

-- Connect the tailpipe -3- up to marking -A- so that slot on tailpipe lines up with marking -B-.

-- Tighten clamping sleeve nut -2-.