Front Muffler, Removing And Installing: Installing
WARNING: This page is about a different car, the 2012 Audi Q5 and 2011 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specification, refer to OVERVIEW - MUFFLER .
Install in reverse order of removal. Note the following:
NOTE:
Replace the seals and self-locking nuts.
-- Install the exhaust system free of tension, refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .
-- Install the noise insulation, refer to OVERVIEW - NOISE INSULATION .