Right Catalytic Converter, Removing And Installing, With Automatic Transmission 0B6: Installing

WARNING: This page is about a different car, the 2012 Audi Q5 and 2011 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to OVERVIEW - MUFFLER (See Figure).

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals and self-locking nuts.

-- Install the right front muffler, refer to FRONT MUFFLER, REMOVING AND INSTALLING .

-- Install the Oxygen Sensor after Three Way Catalytic Converter -G130-, refer to Oxygen Sensor after Three Way Catalytic Converter -G130- REMOVING AND INSTALLING, BANK 1, RIGHT .