Mounting 3.0L TFSI Engine On Manual Transmission

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Mounting 3.0L TFSI Engine On Manual Transmission

Courtesy of AUDI OF AMERICA, LLC

Item	Bolt	Nm
1 ¹⁾	M10 x 50 ²⁾	65
2 ¹⁾	M12 x 100 ³⁾⁴⁾	30 + 90°
3 to 6	M12 x 100 ³⁾⁴⁾	30 + 90°
7	M12 x 125 ³⁾⁴⁾	30 + 90°
8, 11	M10 x 60 ³⁾⁴⁾	15 + 90°
9, 10	M10 x 95 ³⁾⁴⁾	15 + 90°
A	Alignment sleeves for centering
¹⁾ Also secures the starter. ²⁾ Bolt strength rating 10.9. There is no limit to the number of times steel bolts may be used. ³⁾ Audi A4 through VIN 8K-9-066499, Audi A5 through VIN 8T-9-007999: Replace the aluminum bolts. ⁴⁾ Audi A4 from VIN 8K-9-066500, Audi A5 from VIN 8T-9-008000: The aluminum bolts may be used twice. Check the aluminum bolts -2 through 11- to see whether they can be reused CHECK THE ALUMINUM BOLTS -2 THROUGH 11- TO SEE WHETHER THEY CAN BE REUSED. .