Mounting 4.2L FSI Engine On Manual Transmission

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Mounting 4.2L FSI Engine On Manual Transmission

Courtesy of AUDI OF AMERICA, LLC

Item	Bolt	Nm
1 ¹⁾	M10 x 50 ²⁾	65
2 ¹⁾	M12 x 100 ³⁾	30 + 90°
3 to 6	M12 x 100 ³⁾	30 + 90°
7	M12 x 175 ³⁾	30 + 90°
8, 11	M10 x 60 ³⁾	15 + 90°
9, 10	M10 x 95 ³⁾	15 + 90°
A	Alignment sleeves for centering
¹⁾ Also secures the starter ²⁾ Steel bolt - do not replace ³⁾ Check whether the aluminum bolts can be reused. Replace them if necessary.CHECK THE ALUMINUM BOLTS -2 THROUGH 11- TO SEE WHETHER THEY CAN BE REUSED. .