LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Controls, Housing - Manual Transmission 0B4 AWD (Coupe)) >> 34 Controls, Housing >> Removal And Installation >> Noise Insulation >> Removing

Noise Insulation: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the shift lever knob with the shift lever boot SHIFT KNOB WITH SHIFT LEVER BOOT .

-- Remove the multimedia system control head -E380-. Refer to MULTIMEDIA SYSTEM CONTROL HEAD -E380-, REMOVING AND INSTALLING .

Fig 1: Unlocking Springs With The 3409 And Lift Multimedia Control Head Upward
GWWA91-11011Courtesy of AUDI OF AMERICA, LLC

-- Release the tabs -1- in direction of -arrows-. Raise the rear noise insulation when doing this.

Fig 2: Removing Noise Insulation Over Shift Mechanism
GWWA34-10443Courtesy of AUDI OF AMERICA, LLC

-- Pull the noise insulation off the tabs -3-.

-- Pull the boot -2- off the gearshift lever in direction of -arrow-.