LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Controls, Housing - Manual Transmission 0B4 AWD (Coupe)) >> 34 Controls, Housing >> Description And Operation >> Selector Mechanism Overview

Selector Mechanism Overview

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Selector Mechanism
GWWA34-10437Courtesy of AUDI OF AMERICA, LLC
  1. Locking Ring
    • Remove ball when removing
  2. Spacer
  3. Pressure Spring
  4. Ball Guide
    • Do not lubricate
  5. Ball
    • Do not lubricate
  6. Insulation
  7. Bolt
    • 23 Nm
  8. Clamping Plate
    • Do not lubricate
  9. Gearshift Lever
    • Offset faces toward rear
    • Lubricate the guide and the gearshift lever stops; for the correct grease.
    • Lubricate the contact surfaces for the joint SHIFT MECHANISM, ADJUSTING ; for the correct grease.
  10. Spacer Tube
    • Lubricate the outer circumference; for the correct grease.
  11. Shift Lever Support
  12. Joint Piece
    • Between the selector rod and shift lever
    • Lubricate the contact surfaces for the gearshift lever; for the correct grease.
  13. Bolt
  14. Bolt
    • 23 Nm
  15. Nut
    • 10 Nm
  16. Gearshift Rod
  17. Push Rod
    • With bolt and washers
  18. Nut
    • Always replace
    • 20 Nm
  19. Bolt
    • 4 Nm
  20. Gearshift Lever
    • Insert so that master spline aligns with shift rod
    • Lubricate if needed; for the correct grease.
  21. Sealing Boot
  22. Ball Socket
    • Lubricate; for the correct grease.
  23. Bearing Bushing
  24. Connecting Rod
  25. Bolt
    • 20 Nm
  26. Clip
  27. Bolt
    • 20 Nm
scientia non olet · About LEMON Manuals