LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 667 (3.0L - Lubrication - Engine Code(S): CPNB) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pan Lower Section, Removing And Installing >> Removing

Oil Pan Lower Section, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Pan Lower Section Bolt Tightening Sequence
GWWA17-10518Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -arrow- on the Oil Level Thermal Sensor -G266-.

CAUTION:

There is a risk of contamination.

  • There is still a residual amount of oil in lower section of oil pan.

-- Loosen and remove the bolts in the following sequence: -15 to 1-.

-- Loosen and remove the oil pan lower section carefully from the adhesive.