LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 666 (3.0L - Glow Plug System - Engine Code(S): CPNB) >> 28 Ignition/Glow Plug System >> Glow Plug System >> Camshaft Position Sensor -G40-, REMOVING AND INSTALLING >> Removing

Camshaft Position Sensor -G40-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

Fig 1: Camshaft Position Sensor -G40- Location
GWWA23-10517Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-, and remove the Camshaft Position Sensor -G40- -2-.

scientia non olet · About LEMON Manuals