LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 663 (3.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CPNB) >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Overview - Timing Chain Cover >> Upper Left Timing Chain Cover, Tightening Specifications and Sequence

Upper Left Timing Chain Cover, Tightening Specifications and Sequence

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Upper Left Timing Chain Cover, Loosening And Tightening Sequence
GWWA15-10935Courtesy of AUDI OF AMERICA, LLC
NOTE:

Replace any bolts that were tightened with an additional turn.

-- Tighten the bolts in steps in the sequence shown:

Step Bolts Tightening Specification/Additional Turn
1. -1, 2, and 3- Install all the way in by hand.
2. -4 to 7- Install all the way in by hand.
3. -1 to 7- 8 Nm
4. -1 to 7- 8 Nm - this measurement takes into account the timing chain cover shrinkage.
5. -1 to 7- Tighten an additional 90°
scientia non olet · About LEMON Manuals