Brake Rotor, Replacing: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the brake hose and electrical wire from the bracket on the stub axle carrier
-- Remove the rear brake pads, refer to BRAKE PADS, REMOVING AND INSTALLING .
-- Remove the bolts -16 and 17- and remove the brake carrier.
-- Remove the bolt -arrow- while holding the brake rotor in place.
-- Remove the brake rotor from the wheel hub.
NOTE:
When removing the brake rotor from the wheel hub, do not tilt the brake rotor.