LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 658 (Brake System - Mechanical Components) >> 46 Mechanical Components >> Rear Brakes >> Brake Rotor, Removing And Installing >> Removing

Brake Rotor, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the brake caliper with the brake pads and brake carrier, refer to BRAKE CALIPER, REMOVING AND INSTALLING .

CAUTION:
  • Do not actuate the brakes or the electromechanical parking brake when the brake caliper is removed.

-- Remove the securing bolt -arrow- on the brake rotor while holding the rotor firmly.

Fig 1: Identifying Brake Disc Secure Bolt
GWWA46-10018Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake rotor from the wheel hub.

NOTE:

When removing the brake rotor from the wheel hub, do not tilt the brake rotor.

scientia non olet · About LEMON Manuals