Brake Rotor, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications, refer to OVERVIEW - REAR BRAKES .
NOTE:
Use new bolts, allocate correct bolts.
Clean the brake rotor, wheel hub and contact surfaces before installing.
-- Place the brake rotor on the hub.
NOTE:
When positioning the brake rotor, do not tilt it on the wheel hub.
-- Install the securing bolt -arrow- and tighten.
-- Install the brake caliper with brake carrier, refer to BRAKE CALIPER, REMOVING AND INSTALLING .
-- Install the rear wheel, refer to WHEEL, CHANGING AND MOUNTING .
WARNING:
There is the risk of an accident.
- Before moving the vehicle, press the brake pedal firmly several times to seat the brake pads correctly in their operating position.
- Make sure the brakes are working correctly before driving the vehicle.