Electromechanical Parking Brake Control Module -J540-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Fold up the right rear side trim in the luggage compartment.
A Towing Recognition Control Module -- may be installed depending on the model. The trailer mode control module and the bracket for the module must be removed before removing the electronic parking brake control module.
-- Remove the Towing Recognition Control Module, if equipped .
-- Remove the nuts.
-- Slide the locking mechanism for the connection -2- forward.
-- Remove the Electromechanical Parking Brake Control Module - J540- -item 1- with the connector.
-- Remove the connector from the control module.
-- Remove the control module from the vehicle.