Brake Rotor, Replacing, Brake 1LV And 1ZK, Sq5: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications, refer to OVERVIEW - FRONT BRAKES, 1LV AND 1ZK, SQ5 .
NOTE:
Pay attention the arrow on the brake rotor showing the direction of travel and to the left and right installed location when installing the brake rotors.
Use new bolts, allocate correct bolts.
-- Clean the brake rotor and the wheel hub before installing the brake rotor.
-- Place the brake rotor on the hub.
NOTE:
Do not tilt the brake rotor when mounting it on the wheel hub.
-- Install and tighten the bolt -19-
-- Refer to BRAKE CALIPER, REMOVING AND INSTALLING, BRAKE 1LV AND 1ZK, SQ5
WARNING:
There is the risk of an accident.
- Before moving the vehicle, press the brake pedal firmly several times to seat the brake pads correctly in their operating position.
- Make sure the brakes are working correctly before driving the vehicle.