LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 658 (Brake System - Mechanical Components) >> 46 Mechanical Components >> Front Brakes >> Brake Pads, Removing And Installing >> Brake Pads, Removing And Installing, Brake 1LB And 1LC >> Notes

Brake Pads, Removing And Installing, Brake 1LB And 1LC: Notes

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

NOTE:

If old brake pads are being replaced with new ones, then it is necessary to check the brake rotor for wear. Pay attention to the brake rotor wear limit while doing this, refer to.FRONT BRAKES

NOTE:

Always replace brake pads on the same axle at the same time.

Install complete repair kit .

Install on one axle on brake pads from the same manufacturer and with the same quality.

Use only mineral spirits or commercially available brake cleaner to clean the brake caliper.