Brake Pad Wear Display Wire, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the clip for the brake pad wear display into the inner brake pad.
-- Install contact -arrow-.
NOTE:
Make sure the contact for the brake pad wear display fits correctly in the clip inside the inner brake pad.
-- Connect wear indicator connector.
-- Install the electrical connection for the brake pad wear display in the bracket.
-- Mount the wheels, refer to WHEEL, CHANGING AND MOUNTING .